Overview

A highly durable finish that offers the ultimate defence for outdoor decking. Formulated to protect against algae and mould growth whilst having a good flow and quick drying time for easy application. The advanced ultraviolet technology gives a long-lasting finish with superb adhesion.

• Hardwearing & durable
• Resists mould and algae
• Satin finish
• Superb weather protection

Preparation

Always ensure the surface to be painted is clean, dry, and free from any contaminates which may affect adhesion.

• Clean the surface with a stiff bristle brush and a to remove any surface dirt and to bring it back to a clean bright surface.
• Removed any decayed areas and replace with new timber.
• Use a scrapper to remove any resinous deposits.
• Resinous deposits and knots should be degreased by wiping with a clean, lint free cloth, dampened with methylated spirits.
• Freshly sawn ends of decking should be treated with a .
• Do not use Sadolin Decking Stain and Protector on substrates that have had water-repellent preservative treatments or higher build finishes applied. Preservative treatments will need to be weathered whilst previous coatings will need to be completely removed.
• All defective coatings should be completely removed.
• Greyed timber should be renovated back to a clean bright surface this can be done with a suitable detergent or sanding.
• Organic growths must be removed and infected surfaces should be treated with a suitable .

Application

We recommend always following the manufacturer's instructions found on the tin. Stir thoroughly, it is recommended that a small test area is applied before treating the entire surface to ensure compatibility.

• Do not apply if there is a risk of rain or if temperatures are below 8°C and above 25°C.
• Supplied ready to use do not thin.
• Apply using a good quality, synthetic fibre bristle brush.
• pply 2-3 liberal coats to ensure the surface is fully saturated.
• Applying several 'wet on wet' coats until the end grain refuses to absorb anymore.
• Allow 4-6 hours between coats.
• Overspreading will affect the long-term durability of the product.

Aftercare & Storage